Home > Premium Duty >

MAXLite™ 50' 3/4" Hot Water Rubber+™ Hose
MAXLiteâ„¢ 50' 3/4" Hot Water Rubber+â„¢ Hose

Alternative Views:

Our Price: $48.98

Product Code: CELSGHW34050


MAXLite™ 50' 3/4" Hot Water Rubber+™ Hose

Get ready for precision hot water jobs with the MAXLite™ 50' 3/4" Hot Water Rubber+™ Hose. This 3/- inch hot water hose has all the length and power you need for tough commercial applications. It also has a burst strength of 400 PSI that will make any other red rubber commercial hot water hose seem inferior by comparison. From 165°F to -40°F, MAXLite™ designed this one to handle many different temperatures. It can be used around the garden, but it can also serve as an industrial hot water rubber hose.

This 50-foot hot water hose has crushproof aircraft-grade couplings that are made from aluminum. Despite the strength of this hot water garden hose, it is about 40 percent lighter than other hoses. It also won't kink near the spigot thanks to the patented Hose Armour™ technology. Its limited lifetime warranty means it could be the last hose you'll ever need or want.

MAXLite™ 50' 3/4" Hot Water Rubber+™ Hose Features:

  • 40% lighter than standard rubber hoses
  • 2X the strength of traditional rubber hoses
  • Crushproof aircraft-grade aluminum couplings
  • Patented Hose Armour™ prevents kinking at the spigot
  • Meets lead-free standard with Federal Safe Drinking Water Act
  • Limited lifetime warranty

MAXLite™ 50' 3/4" Hot Water Rubber+™ Hose Specifications:

  • Length: 50'
  • Diameter: 5/8"
  • Burst strength: 400+ PSI

Average Rating: Average Rating: 2 of 5 2 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
2 of 5 Could Have Been Better December 10, 2017
Reviewer: Michael from Michigan, United States  
The hose was not as flexible as one would have liked.  It is supposed to be good down to -40, but seemed fairly stiff at +72.

To make it worse, the instructions on the back of the cardboard cover stated "To ensure maximum flexibility, setup should be performed in temperatures above 70 degrees".  However, it failed to explain what "setup" procedure needed to be done.  In point of fact, I  have never heard of any kind of "setup" being needed in over half a century of usage of hoses.

I ordered this 3/4 inch ID hose but found the washers were for a 5/8 inch hose.

All this for an expensive, rubber, premium hose.  Not so good.

Was this review helpful to you?