Swan PressureMASTER Hose

SKU: CSN7958050

Price:
Sale price$43.49
If you want a hose that gets the job done, look no further than Swan’s PressureMASTER® garden hose. As its name suggests, this heavy-duty water hose is an expert at handling high water pressure for the most demanding gardening, landscaping and cleaning needs.

The PressureMASTER® water hose features an excellent 450 PSI burst strength coupled with a wide 5/8-inch inside diameter, which means this high-pressure garden hose can withstand a large volume of water flowing through it at great speed.

To protect it from bursting, the PressureMASTER® heavy-duty garden hose is reinforced with polyester mesh that makes it stronger than average hoses. For added durability and flexibility, it also has an abrasion-resistant jacket that’s oil-resistant for use in high temperatures.

For optimal kink resistance, this high-pressure water hose was crafted with a unique octagonal shape, as well as Swan’s patented Hose Armour® at the female coupling to resist kinking at the water source.

The lead-free aluminum couplings on this heavy-duty hose are also first-rate: They remain crush-proof up to 1,500 PSI, so they can bear the weight should landscaping equipment run over them.

The PressureMASTER® ultra durable hose is backed by our limited lifetime warranty to ensure this high-pressure garden hose is always in top working condition at your home or job site.
  • 450 PSI burst strength
  • High-water-pressure garden hose
  • Ideal for the most demanding gardening, landscaping and cleaning needs
  • Ultra durable, heavy-duty flexible garden hose
  • Extra reinforcement for burst resistance
  • Unique octagonal shape for high kink resistance
  • Abrasion-resistant jacket is also oil-resistant for use in high temperatures
  • Patented Hose Armour® prevents kinking at the water source
  • Lead-free aluminum couplings are crush-proof up to 1,500 PSI
  • Fits all standard faucets and most water accessories
  • Limited lifetime warranty
  • 5/8” inside diameter
  • Available as both a 50-ft. high-water-pressure garden hose and a 100-ft. high-water-pressure garden hose
  • Made in the USA with global components

ID: Available in 5/8-inch
PSI: 450
Duty Rating: Heavy

Weight:

  • 50-feet - 8.4 lbs
  • 100-feet - 16 lbs

How Do I Set Up My Hose?

  • Set up your hose outside in temperatures above 70 degrees Fahrenheit to ensure maximum flexibility.
  • Remove all packaging and ties.
  • Check that the washer is properly seated in the coupling that attaches to the water source.
  • Unwind the hose loosely in a circular motion before attaching it to the water source.
  • Run water through the hose until the water exiting the hose is cool.
  • Leave the hose laid out straight and allow it to heat up during the day.
  • Wind the hose back accordingly.

How Do I Care for My Hose?

  • Disconnect your hose from any standard metal faucet/spigot/hose bib and metal hose attachment and then reconnect at least twice per year to maintain a proper seal of the washer.
  • Before reconnecting, loosen any corrosion evident on the hose coupling, standard metal faucet/spigot/hose bib and metal hose attachment caused by weather or environmental elements, which can cause the hose to fuse to the faucet and/or attachment.
  • Always inspect the washer for proper placement and clear any buildup on the washer, coupling or faucet. This will help prevent potential leaks.
  • Never overtighten coupling connections. Normally, tightening the coupling connections by hand is sufficient. Using a wrench to tighten the couplings might stop a leak in the short-term; however, it can damage the washer, compromising it for future connections.
  • Do not pull and stretch the hose to reach a watering location beyond the length of the hose. When the hose starts to pull off the ground, you put excess force on its connections to the water source and any attachment such as a nozzle. This will not only damage your hose, it can also damage the plumbing that feeds the water source, as well as the attachment.
  • Be careful not to drive over your hose. This can damage the hose and drastically reduce its life.
  • If your hose is left in a shady spot, its exterior can be cleaned periodically with a mild soap-and-water solution to reduce the chance of organic growth. How Do I Store My Hose?
  • Drain your hose when you’re not using it. Water left in a hose for extended periods of time can cause bacteria to form.
  • Once the hose is drained, the male and female ends can be connected for storage. Washer replacement is suggested annually or after a prolonged connection.
  • When coiling the hose for storage, try to do so without leaving any kinks in the hose. A hose stored with kinks will most likely kink in these same locations very easily once the hose is put back in use. Prolonged kinks create weak spots in the hose.
  • Store the hose indoors when not in use.
  • Flush your hose with water when put back in use.

Warnings

  • Do not run hot water through your hose (unless your hose is rated for hot water).
  • Do not run liquids other than water through your hose as they are only designed for use with water.
  • Do not leave the hose under pressure when not in use. Heat or pressure can damage your hose and cause it to leak or burst.
  • Our hoses are not intended for indoor use. Garden hoses are intended for use in residential and/or commercial water systems that have typical average water pressures up to approximately 100 PSI. Garden hoses should not be used for system pressures based upon burst rating.

You May Also Like

Recently Viewed